HomeSolutions
Products
All ProductsPP Corrugated SheetPP Honeycomb PanelPP Turnover BoxPP Pallet Sleeve BoxPP Peel SpoolOther PP Products
IndustriesCase StudiesCertificationsAbout
Get a QuoteContact Us
PP Floor Protection Board with Fleece Backing for Construction Flooring and Surface Protection

PP Floor Protection Board with Fleece Backing for Construction Flooring and Surface Protection

Why Sites Skip Floor Protection at Their Peril

Cosmetic floor damage from routine renovation is rarely covered by insurance. The practical answer is a physical barrier that absorbs the abuse instead of the surface.

What Sets Fleece-Backed PP Honeycomb Apart

Finished floors need more than a dust sheet. A fleece-faced PP honeycomb board adds a rigid, reusable layer that cushions drops and resists the abrasion of constant traffic.

  • Water, Paint & Dust Resistant — Spills bead on the surface and paint splatter wipes away, keeping the protected area clean through messy stages of the build.
  • Reusable for Dozens of Cycles — The PP honeycomb core springs back after impact and stays flat, so one board protects job after job instead of being discarded after a single use.
  • Fast to Lay and Remove — Overlap the sheets and you are done. No tapes, clips, or curing time, which keeps the programme moving.
  • Non-Slip Fleece Backing — The fleece layer grips the substrate and stays put under foot traffic, so crews are not constantly re-laying shifted sheets.
  • Breathable Option — Open-cell formats let moisture escape, reducing the risk of trapped damp on sensitive substrates during long projects.
  • Lightweight Yet Rigid — Crews can carry and lay full sheets quickly without special equipment, then lift them just as easily at the end of the day.

Best Uses for Fleece PP Honeycomb Floor Board

On real sites, the board proves its value wherever finished surfaces meet ongoing work:

  • Model homes and staging
  • Kitchen and bath upgrades
  • Tenant move-in and move-out
  • Painting and decorating projects
  • Commercial office fit-outs

How to Specify the Right Board

Specify by abuse, not by habit. Quiet refurbishments get by with 3-5 mm; busy fit-outs and material staging want 8-10 mm. Pick fleece backing for grip and overlap sheets by a few centimetres. Standard boards suit most projects; bespoke sizes are available on request.

What Crews Ask Us Most

Can crews walk on it straight away?

Yes. The board is laid and immediately walkable, with the fleece backing keeping it stable on tile, timber, or concrete.

How many times can it be reused?

Typical boards handle 30-50 cycles of lay, lift, and store, after which the PP is recyclable rather than landfilled.

Work With Rulowin

Protect the surface and the budget at the same time. A small reusable fleet of PP honeycomb boards replaces rolls of disposable film and the cost of fixing avoidable damage.

← Back to Blog