HomeSolutions
Products
All ProductsPP Corrugated SheetPP Honeycomb PanelPP Turnover BoxPP Pallet Sleeve BoxPP Peel SpoolOther PP Products
IndustriesCase StudiesCertificationsAbout
Get a QuoteContact Us
Reusable PP Stair Protection Board with Felt Layer for Construction and Renovation

Reusable PP Stair Protection Board with Felt Layer for Construction and Renovation

Why Stair Protection Pays Off

Stair treads take relentless abuse from foot traffic, moving furniture, and material handling. Once a nosing is chipped or a riser is gouged, repairs are disruptive and rarely invisible.

Why Crews Choose Felt PP Honeycomb

A PP honeycomb board with a felt backing turns fragile stair treads into a protected runway. The rigid honeycomb core absorbs knocks, and the felt face grips each step so the board stays exactly where you put it.

  • Lightweight Yet Rigid — Crews can carry and lay full sheets quickly without special equipment, then lift them just as easily at the end of the day.
  • Absorbs Impacts — Drops, ladders, and tool carts are the usual culprits behind chipped tiles and dented timber. The honeycomb structure spreads the load so the surface below stays intact.
  • Fast to Lay and Remove — Overlap the sheets and you are done. No tapes, clips, or curing time, which keeps the programme moving.
  • Non-Slip Felt Backing — The felt layer grips the substrate and stays put under foot traffic, so crews are not constantly re-laying shifted sheets.
  • Lower Total Cost — Reuse beats repaint. A small fleet of boards replaces repeated purchases of disposable film and the labour of fixing avoidable damage.
  • 100% Recyclable PP — When a board finally retires, the polypropylene is fully recyclable, supporting circular-site practice and ESG reporting.

Best Uses for Felt PP Honeycomb Stair Board

On real sites, the board proves its value wherever finished surfaces meet ongoing work:

  • Public-building refurbishment
  • Moving furniture between levels
  • Builds using material hoists
  • Stair renovations and resurfacing
  • Painting and rendering stairwells

How to Specify the Right Board

Specify by abuse, not by habit. Quiet refurbishments get by with 3-5 mm; busy fit-outs and material staging want 8-10 mm. Pick felt backing for grip and overlap sheets by a few centimetres. For sites that need it, ask about our reusable variant.

Common Questions

Is it awkward to carry up stairs?

No. The panels are lightweight, so a single person can stage and lay a full flight without mechanical lifting.

Does it stay on the steps?

The felt backing grips each tread, and many crews add a single strip of low-tack tape at the nose for extra security on steep runs.

Protect More, Waste Less

Protect the surface and the budget at the same time. A small reusable fleet of PP honeycomb boards replaces rolls of disposable film and the cost of fixing avoidable damage.

← Back to Blog