HomeSolutions
Products
All ProductsPP Corrugated SheetPP Honeycomb PanelPP Turnover BoxPP Pallet Sleeve BoxPP Peel SpoolOther PP Products
IndustriesCase StudiesCertificationsAbout
Get a QuoteContact Us
PP Honeycomb Protective Stair Board with Felt Surface for Temporary Building Protection

PP Honeycomb Protective Stair Board with Felt Surface for Temporary Building Protection

Why Sites Skip Stair Protection at Their Peril

Furniture and appliance moves are where stairs suffer most. A rigid board turns a risky carry into a routine trip.

Inside the Board: Honeycomb Core Plus Felt Face

A PP honeycomb board with a felt backing turns fragile stair treads into a protected runway. The rigid honeycomb core absorbs knocks, and the felt face grips each step so the board stays exactly where you put it.

  • 100% Recyclable PP — When a board finally retires, the polypropylene is fully recyclable, supporting circular-site practice and ESG reporting.
  • Water, Paint & Dust Resistant — Spills bead on the surface and paint splatter wipes away, keeping the protected area clean through messy stages of the build.
  • Fast to Lay and Remove — Overlap the sheets and you are done. No tapes, clips, or curing time, which keeps the programme moving.
  • Load Bearing — The honeycomb core supports carts, scaffolding, and staged materials, so protection does not mean closing off the workspace.
  • Breathable Option — Open-cell formats let moisture escape, reducing the risk of trapped damp on sensitive substrates during long projects.
  • Non-Slip Felt Backing — The felt layer grips the substrate and stays put under foot traffic, so crews are not constantly re-laying shifted sheets.

Application Scenarios

On real sites, the board proves its value wherever finished surfaces meet ongoing work:

  • Builds using material hoists
  • Painting and rendering stairwells
  • Stair renovations and resurfacing
  • Public-building refurbishment
  • Moving furniture between levels

How to Specify the Right Board

Specify by abuse, not by habit. Quiet refurbishments get by with 3-5 mm; busy fit-outs and material staging want 8-10 mm. Pick felt backing for grip and overlap sheets by a few centimetres. For sites that need it, ask about our temporary variant.

FAQ

Does it stay on the steps?

The felt backing grips each tread, and many crews add a single strip of low-tack tape at the nose for extra security on steep runs.

Is it awkward to carry up stairs?

No. The panels are lightweight, so a single person can stage and lay a full flight without mechanical lifting.

Work With Rulowin

Rulowin supplies reusable PP honeycomb protection boards in felt and fleece formats, sized for floors, stairs, and walls. Tell us your site and traffic, and we will spec the right board.

← Back to Blog