Why Floor Protection Pays Off
Cosmetic floor damage from routine renovation is rarely covered by insurance. The practical answer is a physical barrier that absorbs the abuse instead of the surface.
Why Crews Choose Felt PP Honeycomb
Unlike thin polyethylene sheeting or loose cardboard, a PP honeycomb board with a felt backing gives finished floors a rigid, cushioned shield. The honeycomb core spreads impact while the soft felt face protects delicate surfaces from abrasion.
- Reusable for Dozens of Cycles — The PP honeycomb core springs back after impact and stays flat, so one board protects job after job instead of being discarded after a single use.
- Non-Slip Felt Backing — The felt layer grips the substrate and stays put under foot traffic, so crews are not constantly re-laying shifted sheets.
- Water, Paint & Dust Resistant — Spills bead on the surface and paint splatter wipes away, keeping the protected area clean through messy stages of the build.
- Shields Finish & Substrate — It forms a shock layer between the floor, stair, or wall and the work happening above, protecting both the visible finish and the structure beneath.
- 100% Recyclable PP — When a board finally retires, the polypropylene is fully recyclable, supporting circular-site practice and ESG reporting.
- Lower Total Cost — Reuse beats repaint. A small fleet of boards replaces repeated purchases of disposable film and the labour of fixing avoidable damage.
Where It Earns Its Keep
On real sites, the board proves its value wherever finished surfaces meet ongoing work:
- Tenant move-in and move-out
- Kitchen and bath upgrades
- Residential renovations and remodels
- Commercial office fit-outs
- Painting and decorating projects
A Practical Buying Guide
Specify by abuse, not by habit. Quiet refurbishments get by with 3-5 mm; busy fit-outs and material staging want 8-10 mm. Pick felt backing for grip and overlap sheets by a few centimetres. For sites that need it, ask about our temporary variant.
What Crews Ask Us Most
Does it suit radiant or heated floors?
Breathable variants are available so moisture is not trapped against sensitive heated substrates.
Can crews walk on it straight away?
Yes. The board is laid and immediately walkable, with the felt backing keeping it stable on tile, timber, or concrete.
Will it slip on polished tile?
The felt backing is designed to grip the substrate, so it stays in place under normal foot traffic without extra taping.
Work With Rulowin
Rulowin supplies reusable PP honeycomb protection boards in felt and fleece formats, sized for floors, stairs, and walls. Tell us your site and traffic, and we will spec the right board.