The Real Cost of Unprotected Walls
Walls may seem sturdy, but a knocked ladder or a dragged panel leaves marks that buyers and inspectors notice immediately. Prevention is far cheaper than correction.
Why Crews Choose Fleece PP Honeycomb
For walls, a PP honeycomb panel with a fleece backing acts as a lightweight, reusable bumper. It hangs or leans against the substrate, soaking up impacts that would otherwise dent plaster or scuff paint.
- Lightweight Yet Rigid — Crews can carry and lay full sheets quickly without special equipment, then lift them just as easily at the end of the day.
- Absorbs Impacts — Drops, ladders, and tool carts are the usual culprits behind chipped tiles and dented timber. The honeycomb structure spreads the load so the surface below stays intact.
- Fast to Lay and Remove — Overlap the sheets and you are done. No tapes, clips, or curing time, which keeps the programme moving.
- Reusable for Dozens of Cycles — The PP honeycomb core springs back after impact and stays flat, so one board protects job after job instead of being discarded after a single use.
- Breathable Option — Open-cell formats let moisture escape, reducing the risk of trapped damp on sensitive substrates during long projects.
- Lower Total Cost — Reuse beats repaint. A small fleet of boards replaces repeated purchases of disposable film and the labour of fixing avoidable damage.
Best Uses for Fleece PP Honeycomb Wall Board
On real sites, the board proves its value wherever finished surfaces meet ongoing work:
- Hallway and corridor traffic
- Interior painting and plastering
- Elevator lobbies and entrances
- Protection during demolition
- Moving large furniture and panels
How to Specify the Right Board
Match thickness to traffic. Light foot traffic is fine with 3-5 mm; cart and scaffolding zones need 8-10 mm. Choose fleece backing where grip matters, and size sheets to cover the run with a small overlap. For sites that need it, ask about our reusable variant.
FAQ
Can it be reused between rooms?
Absolutely. Lift, move, and re-stand the same panel across multiple spaces on one project.
How is it fixed to the wall?
Most sites lean or hang the panel and secure the top edge, avoiding adhesive that could mark the finish.
Will it protect against cart impacts?
Yes. The rigid honeycomb core takes the hit that would otherwise dent plasterboard or scuff paint.
Get a Sample or a Quote
Talk to our team for samples and a layout plan. We help contractors standardise on one circular, recyclable protection system across every project.