Why Floor Protection Pays Off
Cosmetic floor damage from routine renovation is rarely covered by insurance. The practical answer is a physical barrier that absorbs the abuse instead of the surface.
Inside the Board: Honeycomb Core Plus Felt Face
A felt-backed PP honeycomb board is the floor’s temporary skin. It takes scuffs, spills, and dropped loads so the real surface stays showroom-clean.
- Water, Paint & Dust Resistant — Spills bead on the surface and paint splatter wipes away, keeping the protected area clean through messy stages of the build.
- Breathable Option — Open-cell formats let moisture escape, reducing the risk of trapped damp on sensitive substrates during long projects.
- Load Bearing — The honeycomb core supports carts, scaffolding, and staged materials, so protection does not mean closing off the workspace.
- Reusable for Dozens of Cycles — The PP honeycomb core springs back after impact and stays flat, so one board protects job after job instead of being discarded after a single use.
- Absorbs Impacts — Drops, ladders, and tool carts are the usual culprits behind chipped tiles and dented timber. The honeycomb structure spreads the load so the surface below stays intact.
- Lightweight Yet Rigid — Crews can carry and lay full sheets quickly without special equipment, then lift them just as easily at the end of the day.
Application Scenarios
On real sites, the board proves its value wherever finished surfaces meet ongoing work:
- Commercial office fit-outs
- Residential renovations and remodels
- Painting and decorating projects
- Tenant move-in and move-out
- Model homes and staging
How to Specify the Right Board
Specify by abuse, not by habit. Quiet refurbishments get by with 3-5 mm; busy fit-outs and material staging want 8-10 mm. Pick felt backing for grip and overlap sheets by a few centimetres. For sites that need it, ask about our reusable variant.
What Crews Ask Us Most
Can crews walk on it straight away?
Yes. The board is laid and immediately walkable, with the felt backing keeping it stable on tile, timber, or concrete.
Will it slip on polished tile?
The felt backing is designed to grip the substrate, so it stays in place under normal foot traffic without extra taping.
How many times can it be reused?
Typical boards handle 30-50 cycles of lay, lift, and store, after which the PP is recyclable rather than landfilled.
Protect More, Waste Less
Protect the surface and the budget at the same time. A small reusable fleet of PP honeycomb boards replaces rolls of disposable film and the cost of fixing avoidable damage.